Breadboards

This is high quality 840-Point Breadboard is our favourite breadboard in Australia. Material：ABS housing + Brass contact clips Size：66 x 174 x...

Add lots more outputs to a microcontroller system with chainable shift registers. These chips take a serial input (SPI) of 1 byte (8 bits) and then...

This 6.5" x 2.125" solderless breadboard has four bus lines each spanning the length of the board, and 63 rows of pins, enough for up to nine 14-pi...

It can be tricky to work out which pin is which when the Raspberry Pi Pico is attached to solderless breadboard. Luckily, the MonkMakes Breadboard ...

The 400 Tie Point Interlocking Solderless Breadboard is a cute half size breadboard, good for small projects. It is 8.2cm(3.23") x 6.2cm(2.44") in...

The 400 Tie Point Interlocking Solderless Breadboard is a cute half size breadboard, good for small projects. It is 8.2cm x 6.2cm in size with a s...

This is a DFRobot exclusive! This is a high quality jumper cable. Hand made with 22AWG multistrand wire and sturdy male pins. Each jumper cable...

This DC power jack/connector is just like the other one that we carry except that it’s terminated with breadboard-friendly pins instead of wide sol...

Introducing our 1.5V 400mA 80x60mm Solar Panel with Male Jumper – the perfect addition to your DIY projects! This compact solar panel comes ready t...

This kit includes two kinds of mini multi-color block building breadboards and 2 base plates of different sizes. Users can freely assemble these br...

This handy double-row, 34-pin 2x17 IDC Box Header is a slightly smaller version of the 2x20 pin IDC Box Header, often used for floppy disk drive in...

These jumper cables are exactly what you need to connect common 0.1" header devices together. Sure you can tape together individual 1x1 header jump...

It's rare to see breadboard friendly I2C sensors, but this TO-220 package with 5 pins is, in fact, such a thing! It's a basic temperature sensor, n...

This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate on...

This is a handy cable for connecting a five pin GHR-05V type locking connector to breadboard friendly male pins. The five male pins that terminate ...

This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The four male pins that terminate one side...

This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The six male pins that terminate one side ...

This is a handy cable for connecting a four pin GHR-04V type locking connector to breadboard friendly male pins. These cables are already included ...

Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Straight 2x20 IDC Male Plug Header Adapter Us...

PIR sensors are used to detect motion from pets/humanoids from about 5 meters away (possibly works on zombies, not guaranteed). This sensor is much...

Here's a handy 3-pack of 5cm x 7cm Proto-board PCBs in Adafruit Black. Both sides have a black silkscreen with some row/column markings. Note that ...

Here's a handy 3-pack of 4cm x 6cm Proto-board PCBs in Adafruit Black. Both sides have a black silkscreen with some row/column markings. Note that ...

Here's a handy 3-pack of 2cm x 8cm Proto-board PCBs in Adafruit Black. Both sides have a black silkscreen with some row/column markings. Note that ...

These premium extension jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come ...