Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are approximately 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header contacts on one end and 0.1" female header contacts on the other. They fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.

We have these in three handy lengths: 3"/75mm, 6"/160mm and 12"/300mm. If you want the female/female type or male/male type, we have those too!

Note: The length of the jumper wires is sometimes a bit longer than what is listed.

For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than 0.1"

Each wire is 28 AWG (7 strands @ 36 AWG)

Pixel-riffic motorcycle visibility
Here is how to use an Adafruit monochrome OLED display with your Raspberry Pi. What can I say? Good things come in small packages!
An accelerator pedal for tutorials! Make a DIY page turner & keep your hands free
Use everyday objects as inputs on your Raspberry Pi.
Exercise your right to skip songs in the office!
Pump some decent decibels with this tiny amp & speakers!

(AF-825)

SKU AF-825
Brand Adafruit

Be The First To Review This Product!

Help other Little Bird Company Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category