A range of connectors for PCB mounting that allow circuit boards to be plugged together at right angles or end-to-end, or cables to be plugged onto circuit boards at right angles or end-on at the edge of the PCB. Both plugs and sockets may be butted up end-to-end to form connectors with any number of ways from 2 upwards.

Both plugs are wafer design into which square, tin-plated brass pins have been inserted. These pins protrude 3.4mm on one side, and should be soldered to the PCB. The nylon wafer sits on the PCB and is 3.3mm thick. The back provides locking and polarising.

• 0.9mm PCB drill hole
Voltage: 250V
Current: brass crimp/tin plated: 2.5A max (solderable)
Contact resistance: 20mΩ max
Dielectric withstanding voltage: 1500VAC
Insulation resistance: 50MΩ
Contact insertion force: 681g
Contact rentention to housing: 3.63kg
Mating force: 199g max
Normal force: 200g min
Housing: UL 94v-0 white nylon
Temperature: 0 to +75°C

Operating temp min 0
Operating Temperature 75°C
Type Single Row Header
Pin Size 0.9mm
Pin Spacing 2.54mm (0.1")
Number of Pins 3pc
Pack Quantity 1pc
Attachment Method Crimp
Device Socket
Insulation Dielectric Voltage Rating 1500V
Insulation Resistance 50M?
header locking
header polarised
Right Angle Mount
DC Voltage 250V
DC current rating 2.5A
Mounting Method PCB


Brand Jaycar

Be The First To Review This Product!

Help other Little Bird Company Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category